The ability to centrally manage the entire system from anywhere with a smart device or tablet is basically the cherry on a very effective, very accommodating cake. MuxLab is now refining its new mobile application that will offer smart control of AV over IP sources and displays with options like custom graphics of color-coded equipment for easy, instant identification. With the new app, users can manage the connectivity of any source to any display and create video walls. Users can easily manage multiple sites or zones using graphical floor plans with the touch of a finger, vastly simplifying the identification, control and access of even the most complex AV installations. Systems can also be configured with presets to handle repetitive or scheduled tasks, from virtual matrix switching to displays and video walls. Set-up is easy and requires a simple download to get started, available on both iOS and Android smartphones and tablets. It will be available in early 2018, and showcased at ISE in Amsterdam.
download upgrade matrix prolink hd ethernet
On the level2 switches (Marvell based) the bootcode is delivered as a separate file that needs to be copied to one's switch. The multi-layer switches however have the bootcode and operational code distributed in one file: one download and (prepare to) activate the newer firmware and with a special command (update bootcode) the switch builds the new bootcode from the operational code information. It is always possible to run a newer firmware operational code on a previous bootcode unless specifically noted in the release notes. In this case, the upgrade will automatically update the boot code during upgrade. When updating a stack, it is a best practice to individually update the stack members using the update bootcode command. Letting the unit completely rejoin the stack before updating any other unit is strongly advised, although updating the units individually (not as part of a stack) is always the safest route. 2ff7e9595c
Comments